Metco Metalizing Gun

Metco 12E

Metco 12E (Metco Metalizing Gun) uses a single wire that is entered in a jet flame. The temperature is close to 10,100 K, melting the wire. The air stream from the jet atomizes the molten particles, falling them onto the substrate.

A Metco Metalizing Gun system uses a combustible gas mixed with oxygen to create a flame outside of the spray gun of approximately 5400° F. This is the heat source to melt the metal to be sprayed. The material to be sprayed is in the form of a wire that falls into the center of the flame where it is melted.

Metco 2AF

The Metco 2AF (Metco Metalizing Gun) is an airflow meter designed to control the airflow to the WireJet Series of guns. Air Trio is created for the Wire Jet series gun, it has a particle filter, water trap, and air pressure regulator built within one unit. There is another quick disconnect for cooling air jets or other auxiliary compressed air requirements. Our wire stand manages both 1/8-inch and 3/16-inch open coils of wire reducing the need for spools. It has a built-in wire straightener that permits stable wire feed into the WireJet.

Wire for Metalizing

The standard wire size is 1/8″ (8 ga., 3.2mm), with different drive rolls and nozzle, you can also use 3/16″ (5 ga., 4.7mm); .091″ (11 ga., 2.3mm); and .057″ (15 ga., 1.4mm) wire as an option. Wire Flame spray gun is a robust and user-friendly wire metal spray system used for coating both ferrous and non-ferrous material. Key applicability is replacing worn-out elements, conductivity, and anti-corrosion coating.

The wire is fed into the front torch through the air-driven turbine. Fuel gas like acetylene, LPG Propane, and oxygen is properly and safely mixed in the siphon plug head assembly which in turn provides a combustible heat source. Metco Metalizing Gun molten metal is atomized and propelled by means of compressed air in the form of fine metal spray for coating on job surfaces.

Generally, suitable for all metals, and metal alloys in wire form are used for coating i.e. Steel, Aluminium, Brass, Zinc, Copper, Stainless Steel, Bronze, Molybdenum, Nickel Alloy, etc. Standard Wire used for flame spray purposes is generally 4.8mm or 3.2mm.

Advantages of Metco Metalizing Gun

Non-conductive wires can be sprayed.
Less fine dust generated when spraying makes overspray light flammable or explosive.
More portable for on-site spraying.
Simple to ignite.
Easy to operate.
High spray rate with low gas consumption.
Low maintenance design reduces operating costs.
It can be used among both hard and soft wires series.
Extension modules for internal bore applications.